RADLMA5130

DL S M 50-260 24W PS CCT


This 24 W LED ceiling luminaire combines adjustable lighting with built-in sensors. Set the colour temperature in steps from 3,000 to 5,700 K and the luminous flux from 1,440 to 2,880 lm to suit the installation. Its direct, symmetrical, very wide beam (>80°) provides broad light distribution. Motion and light sensors are integrated, and the luminaire can be recessed or surface mounted, with through-wiring supported. The front face is rated IP54 and the L70/B50 lifetime is 100,000 hours.


Report an error

Specifications

Suitable for surface mounting Yes
Suitable for built-in mounting Yes
Wall mounting No
Suitable for suspended mounting No
Suitable for ceiling mounting Yes
Suitable for traverse mounting No
Suitable for pedestal/floor mounting No
Suitable for light-track mounting No
Suitable for clamp-mounting No
Suitable for low voltage cable system No
Adjustability Not adjustable
With movement sensor Yes
With presence indicator No
With light sensor Yes
Lamp type LED not exchangeable
With light source Yes
Lamp holder None
Material housing Plastic
Colour housing White
Material cover Plastic matt/satinized
Surface brushed No
Voltage type AC
Nominal voltage 220 V ... 240 V
Nominal current 180 mA ... 180 mA
Type of control gear LED operating device voltage-controlled
Control gear included Yes
Dimmable No
Dimming 0-10 V No
Dimming 1-10 V No
Dimming DALI No
Dimming DMX No
Dimming DSI No
Dimming potentiometer (integrated) No
Dimming LineSwitch No
Dimming manufacturer's proprietary system No
Dimming mains voltage modulation No
Dimming phase cut-off No
Dimming phase cut-on No
Dimming programmable No
Dimming RF No
Dimming Sine Wave Reduction No
Dimming Touch and Dim No
Dimming Zigbee No
Dimming with push-button No
Reflector None
Light distributor Diffuser lens/optic/panel
Light sharing Symmetric
Beam angle > 80° - Extreme wide beam
Light outlet Direct
Rated life time L70/B50 at 25 °C 100000 h
Degree of protection (IP), front side IP54
Impact strength IK05
Rated ambient temperature acc. IEC62722-2-1 -20 °C ... 40 °C
Max. system power 24 W
Colour of light White
Colour temperature 3000 K ... 5700 K
Colour rendering index CRI 80-89
Power factor 0.8000
Length 330 mm
Width 330 mm
Height/depth 19 mm
Type of wiring Suitable for loop-through wiring
Number of poles 2.0000
Type of connection Push-in clamp
Filament test according to IEC 60695-2-11 650 °C - 30 s
Photobiological safety according to EN 62471 RG0
Colour consistency (McAdam ellipse) SDCM6