| ds3 RADLMA5129 4003556415560 en hup |
| ds1 RADLMA5129 4003556015562 fr hup |
| ds1 RADLMA5129 4003556015562 nl hup |
RADLMA5129
Report an error
DL S M 50-180 18W PS CCT
This 18 W LED luminaire combines motion detection with a light sensor for automatic lighting control. Its luminous flux can be set in levels from 1,080 to 2,160 lm, with a selectable colour temperature of 3,000 to 5,700 K. Suitable for recessed or surface mounting on ceilings, it has IP54 protection on the front and IP20 protection on the rear. Its rated L70/B50 lifetime is 100,000 hours.
Report an error
Specifications
| Suitable for surface mounting | Yes |
| Suitable for built-in mounting | Yes |
| Wall mounting | No |
| Suitable for suspended mounting | No |
| Suitable for ceiling mounting | Yes |
| Suitable for traverse mounting | No |
| Suitable for pedestal/floor mounting | No |
| Suitable for light-track mounting | No |
| Suitable for clamp-mounting | No |
| Suitable for low voltage cable system | No |
| Adjustability | Not adjustable |
| With movement sensor | Yes |
| With presence indicator | No |
| With light sensor | Yes |
| Lamp type | LED not exchangeable |
| With light source | Yes |
| Lamp holder | None |
| Material housing | Plastic |
| Colour housing | White |
| Material cover | Plastic matt/satinized |
| Surface brushed | No |
| Voltage type | AC |
| Nominal voltage | 220 V ... 240 V |
| Nominal current | 150 mA ... 150 mA |
| Type of control gear | LED operating device voltage-controlled |
| Control gear included | Yes |
| Dimmable | No |
| Dimming with push-button | No |
| Light sharing | Symmetric |
| Beam angle | > 80° - Extreme wide beam |
| Light outlet | Direct |
| Rated life time L70/B50 at 25 °C | 100000 h |
| Degree of protection (IP), front side | IP54 |
| Impact strength | IK05 |
| Rated ambient temperature acc. IEC62722-2-1 | -20 °C ... 40 °C |
| Suitable for lamp power | 18 W ... 18 W |
| Max. system power | 18 W |
| Colour of light | White |
| Colour temperature | 3000 K ... 5700 K |
| Colour rendering index CRI | 80-89 |
| Power factor | 0.8000 |
| Length | 225 mm |
| Width | 225 mm |
| Height/depth | 19 mm |
| Outer diameter | 225 mm |
| Type of wiring | Suitable for loop-through wiring |
| Number of poles | 2.0000 |
| Type of connection | Push-in clamp |
| Filament test according to IEC 60695-2-11 | 650 °C - 30 s |
| Photobiological safety according to EN 62471 | RG0 |
| Colour consistency (McAdam ellipse) | SDCM6 |
