| ds3 RAFLLA5093 4003556415270 en hup |
| ds1 RAFLLA5093 4003556015272 fr hup |
| ds1 RAFLLA5093 4003556015272 nl hup |
RAFLLA5093
Report an error
FL S 3000/830 BK IP65 SENSOR
Delivering 2,800 lm of 3,000 K warm white light, this LED luminaire provides a very wide, symmetrical beam of over 80°. It incorporates a passive infrared motion sensor and a light sensor. The anthracite aluminium housing has an IP65 rating and is suitable for surface mounting, while its adjustable, swivelling design helps direct the light where needed. Rated L70/B50 lifetime is 50,000 hours at 25°C.
Report an error
Specifications
| Suitable for surface mounting | Yes |
| Suitable for built-in mounting | No |
| Adjustability | Rotating and swivelling |
| With movement sensor | Yes |
| With light sensor | Yes |
| Lamp type | LED not exchangeable |
| With light source | Yes |
| Lamp holder | None |
| Material housing | Aluminium |
| Colour housing | Anthracite |
| Voltage type | AC |
| Nominal voltage | 220 V ... 240 V |
| Nominal current | 130 mA ... 130 mA |
| Type of control gear | LED operating device voltage-controlled |
| Control gear included | Yes |
| Dimmable | No |
| Dimming 0-10 V | No |
| Dimming 1-10 V | No |
| Dimming DALI | No |
| Dimming DMX | No |
| Dimming DSI | No |
| Dimming potentiometer (integrated) | No |
| Dimming LineSwitch | No |
| Dimming manufacturer's proprietary system | No |
| Dimming mains voltage modulation | No |
| Dimming phase cut-off | No |
| Dimming phase cut-on | No |
| Dimming programmable | No |
| Dimming RF | No |
| Dimming Sine Wave Reduction | No |
| Dimming Touch and Dim | No |
| Dimming Zigbee | No |
| Dimming with push-button | No |
| Reflector | None |
| Light sharing | Symmetric |
| Beam angle | > 80° - Extreme wide beam |
| Light outlet | Direct |
| Rated life time L70/B50 at 25 °C | 50000 h |
| Degree of protection (IP), front side | IP65 |
| Impact strength | IK05 |
| Max. system power | 22.8 W |
| Colour of light | White |
| Colour temperature | 3000 K ... 3000 K |
| Colour rendering index CRI | 80-89 |
| Length | 156 mm |
| Width | 59 mm |
| Height/depth | 203 mm |
| Type of wiring | Ending |
| Type of connection | Other |
| Filament test according to IEC 60695-2-11 | 650 °C - 30 s |
| Photobiological safety according to EN 62471 | RG0 |
| Colour consistency (McAdam ellipse) | SDCM6 |
